Jump to Main Menu Jump to Sub Menu Jump to Content
Search:
View Mohawk's KPI Results Mohawk CollegeContinuing Education Engineering Technology

Contact Us

CE Engineering Technology
Phone: 905-575-2507 
Fax: 905-575-2549
Email: CE Engineering
Dept. Location: A111-STARRT Campus

Jeff Gill
STARRT Program Manager
Phone: 905-575-1212 
ext. 5058
Email: Jeff

Godfrey Nicholson
Brantford Program Manager
Phone: 519-758-6027
Email: Godfrey

Ask Mohawk

Type in a complete question below:

Mohawk College reserves the right to modify program availability, length, campus locations, or curriculum, or to adjust fees, admission requirements, policies or procedures at any time.

Prompt notice will be given to all affected applicants and students. Mohawk College cannot accept any liability for the consequences of these changes.

Mohawk College is fully accredited and funded by the Ministry of Training, Colleges and Universities and is a full member of Colleges Ontario and AUCC (Association of Universities and Colleges of Canada).

Bookmark and Share

Welding Courses

WELDRE125 - Welding I

Focus on arc Welding with accepted electrodes (E6011, E6013, E7018) in the flat position, butt, lap and fillet, using light gauge and 1/4+ plate metal. Course takes place at the Brantford Campus. Contact Godfrey Nicholson for details.

WELDRE126 - Welding II

Further develop welding skills in the vertical and horizontal positions. Prerequisite: WELDRE125. Course takes place at the Brantford (BF) Campus. Contact Godfrey Nicholson for details.

WELDRE129 - Welding III

Continue developing welding skills in all positions. Prerequisite: WELDRE126. Course takes place at the Brantford (BF) Campus. Contact Godfrey Nicholson for details.
Completion of:
  • WELDRE125
  • WELDRE126 and
  • WELDRE129

may qualify you for C.W.B. equivalent certification, in the flat position only.

WELDRE215 - Welding Pipe & TIG

Develop skills in pipe Welding, Shielded Metal Arc Welding with the uphand technique, Gas Tungsten Arc Welding (TIG) on the 1st pass pipe welding, and SMAW with the downhand technique for Gas and Oil Transmission Lines. Prerequisites: WELDRE129 or WELDRE236 or equivalent. Course takes place at the STARRT (SC) Institute. Contact Jeff Gill for details.

WELDRE226 - Welding

Cover basic Shielded Metal Arc Welding; SMAW to C.W.B. Standards; SMAW to TSSA Standards; Gas Metal Arc Welding including Spray Arc, Short Arc and Flux-Core techniques. Course takes place at the STARRT (SC) Institute. Contact Jeff Gill for details.

WELDRE234 - Shielded Metal Arc Welding 1

Develop skills in welding in the flat and horizontal positions, safety, and Oxyfuel gas cutting. Course takes place at the STARRT (SC) Institute.  Contact Jeff Gill for details. 

WELDRE235 - Shielded Metal Arc Welding 2

Focus on welding in the vertical position, identification of basic joint design, selection of electrodes, terminology and safety. Prerequisite: WELDRE234 or equivalent. Course takes place at the STARRT (SC) Institute.  Contact Jeff Gill for details.

WELDRE236 - Shielded Metal Arc Welding 3 

Learn to weld in overhead positions, identify basic joint design, select electrodes, and work safely. Prerequisite: WELDRE235 or equivalent. Course takes place at the STARRT (SC) Institute.  Contact Jeff Gill for details.

WELDRE237 - Gas Metal Arc Welding

Weld basic joints in the flat and horizontal positions using the GMAW (MIG) spray and short circuit transfer modes as well as FCAW (Flux Cored Arc Welding) with a gas shielding in the flat, horizontal, and vertical positions. Introduction to basic PULSE-MIG transfer and the GTAW (TIG) process. Prerequisite: WELDRE236 or WELD10052 or equivalent. Course takes place at the STARRT (SC) Institute.  Contact Jeff Gill for details.